Our integrated circuits and reference designs can help you build a fire alarm control panel (FACP) with innovative features such as addressing capability, advanced human machine interface (HMI), hot plug expansion modules, and modular architecture.
FACP design usually requires:
Power factor correction, higher efficiency/thermal efficiency, and compliance with EMC/EMI standards.
Lead acid battery charging is realized through seamless power switching.
A variety of communication protocols applicable to wired (Ethernet, RS-485, RS-232, USB) and wireless interfaces.
Power is transmitted to the loop power supply equipment through a line and commands are transmitted.
Mechanical relay reliability.
Associated products
Brushed DC (BDC) motor driver (1)
DRV8251
50V, 4.1A H-bridge motor driver with integrated current regulation and latch OCP function
Universal Operational Amplifier (6)
TLV9351 
Single, 40-V, 3.5-MHz, low-power operational amplifier
LM324LV 
Four way, 5.5V, 1MHz, 3mV offset voltage operational amplifier
LPV801 
Single, 5.5-V, 8-kHz, ultra low quiescent current (450-nA), 1.6-V min supply, RRO op amp
TL081H  
Single circuit, 40V, 5.25MHz, 4mV offset voltage, 20V/µ s operational amplifier with operating temperature range of - 40 ° C to 125 ° C and input close to V+
LM324A 
Quad, 30-V, 1.2-MHz, 3-mV offset voltage operational amplifier
TLV2462A 
Dual, 6-V, 6.4-MHz, 1.5-mV offset, RRIO operational amplifier
Current detection amplifier analog output (2)
INA186 
40V bi-directional high-precision current detection amplifier with picoamp input bias current and enable pin
INA169
2.7V to 60V, 440kHz variable gain current sense amplifier